Offshore cables

RFOU P1/P8 - 0.6/1 kV

RFOU P1/P8 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems. The cable is also used for installations in areas exposed to mud and drilling or cleaning fluids.

> See products

RFOU(C) S2/S6 - 250 V

RFOU(C) S2/S6 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems. The cable is also used for installations in areas exposed to mud and drilling or cleaning fluids.

> See products

RFOU(I) S1/S5 - 250 V

RFOU(I) S1/S5 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists. The cable is also used for installations in areas exposed to mud and drilling or cleaning fluids.

> See products

P108 UX H-M flexible / UX P15 flexible

P108 UX H-M flexible / UX P15 fleksibel is a flame retardant, low smoke and halogen free cable, used for earthing. The cable is mud resistant in accordance with NEK 606:2016 and UV resistant.

> See products

BFOU P5/P12 - 0.6/1 kV

BFOU P5/P12 is used for permanent installation in the control circuits and lights and emergency lighting and critical offshore units where there are demands for fire safety. For installation in the areas where there is a risk of exposure to the mud, cuttings or cleaning fluids. The cable is fire resistant according to IEC 60331-21 and shielded against electromagnetic interference.

> See products

BFOU(C) S4/S8 - 250 V

BFOU(C) S4/S8 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists. The cable is also used for installations in areas exposed to mud and drilling or cleaning fluids.

> See products

BFOU(I) S3/S7 - 250 V

BFOU(I) S3/S7 is used in fixed installations for control, instrumentation and telecommunication in both explosion and safe areas, in emergency and critical systems where requirement for fire resistance exists. The cable is also used for installations in areas exposed to mud and drilling or cleaning fluids.

> See products

4x2xAWG 23/1 S/FTP Cat. 7, UV

The cable is used in telecommunication network for transmission of digital and analogical signals up to 1000 MHz. Due to its unique design and UV resistance, the cable is suitable for installation in maritime and offshore environments, but it can also be used for industrial use, where demands are made for increased fire safety. The cable is UV resistant, marine approved and paired, individually screened. 

> See products

4x2xAWG24/1 S/FTP CAT. 6 LSZH-SHF1, UV

The cable is used in telecommunication network for transmission of digital and analogical signals up to 250 MHz. Due to its unique design and UV resistance, the cable is suitable for installation in maritime and offshore environments, but it can also be used for industrial use, where demands are made for increased fire safety. The cable is UV resistant, marine approved and paired, individually screened. 

> See products

Your contacts

Claus Madsen

Claus Madsen

Sales, Industry/Power/Marine

cm@scankab.dk
+45 6343 1536
Freddy Linde Jensen

Freddy Linde Jensen

Commercial Manager

fj@scankab.dk
+45 6029 7211
Søren Porse

Søren Porse

Country Manager

sp@scankab.dk
+45 2069 7205