Building automation cables

SCANFLEX CTS-HB - 300/500 V

SCANFLEX® CTS-HB is used indoor  as well as outdoor (RAL 8023) for signal transmission in CTS, and where there is a requirement of a flexible cable connection. The cable is halogen free and UV resistant

> See products

SCANFLEX CTS-HZ - 300/500 V

SCANFLEX® CTS-HZ is used indoor as well as outdoor (RAL 8023) for signal transmission in CTS, and where there is a requirement of a flexible cable connection. The cable is halogen free and UV-resistant.

> See products

FLEXTRONIC 2CH 2060, brown - 300 V

FLEXTRONIC® 2CH 2060, brown is used where a flexible cable connection is needed, for instance measure or control equipment in machinery and production.

> See products

SCANFLEX CTS-CHZ - 300/500 V

SCANFLEX CTS-CHZ is used indoor for signal transmission in CTS, and where there is a requirement of a flexible cable connection. The cable is halogen free, UV resistant, and it has a braided copper screen.

> See products

SCANFLEX Hybrid - 300/500 V

SCANFLEX Hybrid is typically used in CTS installations where 2 protective conductors and a flexible cable connection is needed. The cable is oil-resistant, flame retardant, UV-resistant.

> See products

SCANFLEX STC Hybrid - 300/500 V

SCANFLEX STC Hybrid is typically used for CTS installations where 2 protective conductors and a flexible and screened cable connection is needed. The cable is oil-resistant, flame retardant, UV-resistant and electromagnetically protected.

> See products

SCANFLEX Hybrid - 0,6/1 kV

SCANFLEX Hybrid is typically used in CTS installations where 2 protective conductors and a flexible cable connection is needed. The cable is oil-resistant, flame retardant, UV-resistant.

> See products

SCANFLEX STC Hybrid - 0,6/1 kV

SCANFLEX STC Hybrid is typically used for frequency converters and CTS installations where 2 protective conductors and a flexible and screened cable connection is needed. The cable is oil-resistant, flame retardant, UV-resistant and electromagnetically protected.

> See products

SCANFLEX HB CTS Hybrid - 300 V

SCANFLEX® HB CTS Hybrid is a hybrid cable with a Scanbus CTS cable implemented in a CTS-HB cable. 

SCANBUS CTS is used in industrial automation systems for computer networks and eletronic systems for data transmission control. The cable can be used over longer distances compared with RS 232-422 and RS 485 - Modbus. Is suitable indoor as well as outdoor (RAL 8023) for signal transmission in CTS, and where a flexible cable connection is required. The cable is halogen free and UV-resistant.

> See products

SCANBUS CTS - 300 V

SCANBUS® CTS is used in the industrial automation systems for computer networks and eletronic systems for data transmission control. The cable kan be used over longer distances compared with RS 232-422 and RS 485 - Modbus. The cable is UV resistant.

> See products

LONBUS H 3005 - 300 V

LONBUS H 3005 is used indoor as an instrument and data cable as well as for signal transmission in CTS units. The cable is UV-resistant.

> See products

EIB-BUS H 3005 - 250 V

EIB-BUS H 3005 bliver brugt til styresystemer til komfort, sikkerhed og energibesparelse.

> See products

PTS-HF, screened signal cable

PTS-HF screened halogen free signal cables are used as tele- signal- and alarm cables in low voltage systems - including building management system. For indoor use, solid hem. The cable must not be walled or buried in the ground.

> See products

Your contact

Claus Madsen

Claus Madsen

Sales, Industry/Power/Marine

cm@scankab.dk
+45 6343 1536